Laminated Tube Filling Machine with Sealing,
Cutting and Batch Coding
Our range of Laminated Tube
Filling Machines have a syringe pump housing and rotary piston
filling device that has a blow off device pneumatic tail cut-off
system. These machines have a high filling speed of 40 to 50 tubes
per minutes and jacketed hopper single head type of capacity of 40
liters. These tube filling machines are provided with stainless
steel spring loaded change part 12 nos. nylon holders one tube size.
These machines are also equipped with temperature controller with 3
KW SS tubular heater. Our range of machines have a label sensor and
controller and various optional accessories like vacuum cleaning,
jacketed hopper with stirrer, product level sensor in filling hopper
with pump controller, automatic cassette loader to load the tubes
and orientation sensors with stepper motor.
Features
- A Fully Automatic Lami/Plastic Tube Filling machine, with
have high operating speed and 12 Stations compact rotar.
- Model - GMP Capable to fills from 40-300ml
- Its contact parts are manufactured using quality stainless
steel of grades 316
- These machines are no tube - no fill device, with a bottom
up filling system and filling accuracy +/ - 0.1%.
- These machines have a tube diameter of 16-60mm and height
60-258mm
- The tube holding Cup is manufactured using quality stainless
steel of grade 304.
- 8. Manifold cam indexing device Make Camfild.
- Geared Motor 0.5 HP, RPM-40 REMI make
- Belt Less Stirrer Device with augur to keep the product in
Continuous homogeneous condition.
Technical Specifications
Filling Station: These machines consist of a hopper of
capacity 40kg. with cut off valve that is connected to the filling
cylinder which also has a capacity adjusting arrangement. The
delivery nozzle is provided with special pneumatic cut off system to
prevent dripping.
Sealing System: This system comprises of a pre-heating
station and a sealing station.
Heating Station: This station is compressed with hot air is
blown to pre- heat the sealing area . The compressor air is then
heated in a chamber that is fitted with a hot air tool leister. The
Pneumatic regulator is provided to control the air pressure and a
temperature controller to control the heat.
Sealing Station : This station is pneumatically operated and
special jaws seal the tube. Batch coding is done at this station.
Trimming Station: The uneven end is trimmed at this station
.
Batch-Coding Station :Batch coding is provided at the
Sealing station.
Ejection: The tubes are automatically ejected at this
station
Output: 1500-1800 tubes per hour single head
Electrical: The machine is fitted with 1 Hp motor that is
1440 rpm Hindustan make along with 30:1 ratio gear box, electrical
panel box and a no tube, no fill process is also provided.
Note: An air compressor of 3Hp is required.
Dimensions : L 1330mm x W 920mm x H 1850mm
